Etabloc SYT
by admin

Etabloc SYT

Product Description:

Horizontal, single-stage volute casing pump in back pull-out design with ratings and main dimensions to EN 733, with replaceable casing wear rings.

Heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation.

Overview of technical data
Q (50Hz) 1.5 – 337.0 (m³/h)
H (50Hz) 2.0 – 99.0 (m)
Type of bearing Plain bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection IP55
Explosion protection IP55
No. of impeller entries Single entry
Impeller material (EN standard) JL 1040 / A48CL35
Type of installation Close-coupled
Type of coupling Direct
Type of lubrication Product lubrication
Max. permissible fluid temperature 350.0 (°C)
Nozzle position End suction
Maximum operating pressure PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4021 + QTHRC55
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Flange
UNSPSC classification 4015150300
Casing material (EN standard) JS 1030 / A536 GR 60-40-18
eClass assignment 36410000, 36410100, 36410101
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering, Energy, Building services, Oil / Gas
Casing material Nodular cast iron
Maximum discharge-side pressure 16.0 (bar)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)
Technical specifications
Q max 337.0 m³/h
H max 99.0 m
Technical Data
Selection Curves
%d bloggers like this: