Etanorm SYT
Product Description:
Design
Horizontal, long-coupled volute casing pump in back pull-out design with ratings and main dimensions to EN 733, single-stage, with replaceable casing wear rings. Design to ATEX.
Application
Heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation (DIN 4752).
Overview of technical data
Q (50Hz) | 1.5 – 765.0 (m³/h) |
H (50Hz) | 2.0 – 102.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Explosion protection | IP55 |
Explosion protection | IP55 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL 1040 / A48CL35 |
Type of installation | Long-coupled |
Type of coupling | Direct |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 350.0 (°C) |
Nozzle position | End suction |
Maximum operating pressure | PN 16 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | 1.4021 + QTHRC55 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Closed / Radial |
Type of connection | Flange |
Casing material (EN standard) | JS 1030 / A536 GR 60-40-18 |
eClass assignment | 36410000, 36410100, 36410101 |
Installation position | Horizontal |
Shaft seal type | Mechanical seal |
Main applications | Industry and process engineering, Energy, Building services, Oil / Gas |
Casing material | Nodular cast iron |
Maximum discharge-side pressure | 16.0 (bar) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |