Etabloc – End Suction Pumps
by admin

Etabloc - End Suction Pumps

Product Description:

Design
Close-coupled, single-stage volute casing pump, ratings to EN 733, with replaceable shaft sleeve and casing wear rings. Design to ATEX.

Application
Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, handling of hot water, cooling water, fire-fighting water, seawater, oil, brine, drinking water, cleaning agents, brackish water, service water, etc.

Overview of technical data
Q (50Hz) 1.5 – 716.0 (m³/h)
H (50Hz) 2.0 – 144.0 (m)
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
No. of impeller entries Single entry
Impeller material (EN standard) 1.4408 / A743CF8M, CC480K-GS / B30C90700, JL 1040 / A48CL35
Type of installation Close-coupled
Type of coupling Direct
Max. permissible fluid temperature 140.0 (°C)
Guaranteed to be silicon-free Yes
Nozzle position End suction
Maximum operating pressure PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4571, C45+N
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Flange
Casing material (EN standard) 1.4408 / A743GRCF8M, CC480K-GS/B30 C90700, JL 1040 / A48CL35B, JS 1030 / A536 GR 60-40-18
eClass assignment 36410000, 36410100, 36410101
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Building services, Water, Energy, Industry and process engineering
Casing material Cast iron, Stainless steel, Nodular cast iron, Bronze
Maximum discharge-side pressure 16.0 (bar)
Maximum drive rating 55.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)
Technical specifications
Q max 716.0 m³/h
H max 144.0 m
Brochures
Technical data
Selection Curves