KWP
by admin

KWP

Product Description:

Design
Horizontal, radially split volute casing pump in back pull-out-design, single-stage, single-entry, available with various impeller types: non-clogging impeller, open multi-vane impeller, free-flow impeller. Design to ATEX.

Application
Handling of pre-treated sewage, waste water, all types of slurries without stringy substances and pulps up to 5 % bone dry with a maximum density of 1.4 kg/dm3.

Overview of technical data
Q (50Hz) 4.0 – 15,000.0 (m³/h)
H (50Hz) 1.0 – 140.0 (m)
Type of bearing Rolling element bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage, high voltage
No. of impeller entries Single entry
Impeller material (EN standard) CERAMIKPOLYSIC, ERN, NORICHROM, NORICLOR, NORIDUR 1.4593, NORIHARD
Type of installation Long-coupled
Type of coupling Jack shaft / Belt drive, Direct, Gear
Type of lubrication Oil lubrication
Max. permissible fluid temperature 280.0 (°C)
Nozzle position End suction
Maximum operating pressure PN10
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) C45+N
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Free flow impeller, Closed, Radial, Multi-vane impeller, Open
Type of connection Flange
Casing material (EN standard) CERAMIKPOLYSIC, JL1040, NORICLOR, NORICROM, NORIDUR 1.4593, NORIHARD
eClass assignment 36410101, 36410000, 36410100, 36410103
Free passage 250.0 (mm)
Installation position Horizontal
Shaft seal type Mechanical seal, Gland packing
Main applications Industry and process engineering, Water, Waste water / sewage, Energy, Mining / Dredges
Casing material Special cast material, Cast iron, Duplex steel
Maximum discharge-side pressure 10.0 (bar)
Maximum drive rating 1500.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)
Technical specifications
Q max 15,000.0 m³/h
H max 140.0 m
Brochures
Technical Data
Selection Curves
%d bloggers like this: