Sewabloc
Product Description:
Design
Horizontal or vertical volute casing pump in closecoupled design with free-flow (F), multi-vane (K) and diagonal single vane (D) impellers, discharge flange to DIN and ANSI standards. Design to ATEX.
Application
Handling of sewage and all types of waste water in waste water management and industry.
Overview of technical data
Q (50Hz) | 10.0 – 830.0 (m³/h) |
H (50Hz) | 2.0 – 80.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL 1040, 1.4517, JN 3029 |
Type of installation | Close-coupled |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 70.0 (°C) |
Nozzle position | End suction |
Maximum operating pressure | PN16 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | 1.4462, 1.4021 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Open, Multi-vane impeller, Free flow impeller, Closed, Radial |
Type of connection | Flange |
Casing material (EN standard) | JL 1040 |
eClass assignment | 36410101, 36410103 |
Free passage | 120.0 (mm) |
Installation position | Horizontal or vertical |
Shaft seal type | Mechanical seal |
Main applications | Waste water / sewage, Industry and process engineering |
Casing material | Cast iron |
Maximum discharge-side pressure | 10.0 (bar) |
Maximum drive rating | 37.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1750.0 (1/min) |